One platform, multiple applications
MQTT live telemetry, device health, alerts, trends, statistics, remote controls, auto/manual operation and multi-device monitoring — all in a single unified console.
What the console gives an operator
Real-time MQTT
Live device status and telemetry over MQTT/WebSocket — readings update as they happen, not on a polling delay.
Device health
Online/offline state and last-seen monitoring for every connected device, at a glance.
Alerts
Threshold and warning-condition visibility so out-of-range readings surface immediately.
Analytics
History charts with current, minimum, maximum and average values over a chosen window.
Remote control
Send device-specific operating commands — start a pump, open a gate, switch a light — from the console.
Auto / manual
Application-specific operating modes, switchable per device without touching the hardware.
Restart
Remote restart command where the device supports it, for fast recovery without a site visit.
Multi-device
Multiple device instances organized by class, so one console scales from a single site to many.
Field devices → console → action
The same loop runs under every application on the platform, whether it's a water tank or a factory floor.
Connect
Field devices publish readings and status over MQTT to the platform in real time.
Monitor
The console shows live status, device health and history charts with current, min, max and average.
Control
Operators respond to alerts with remote commands — auto/manual switching, restart, pump or gate control.
See the console on a live device feed
We'll walk you through real telemetry, alerts and remote-control flows for your use case.